Santa Fe Rev B1 (Retired)
-firepot.JPG','','resizable=yes,location=yes,menubar=no,scrollbars=yes,status=no,toolbar=no,fullscreen=no,dependent=no'))) |
-1%20large.jpg','','resizable=yes,location=yes,menubar=no,scrollbars=yes,status=no,toolbar=no,fullscreen=no,dependent=no'))) |
| Firepot Assembly
Click Here to Enlarge |
|
-glass.JPG','','resizable=yes,location=yes,menubar=no,scrollbars=yes,status=no,toolbar=no,fullscreen=no,dependent=no'))) |
|
| Face and Glass Assembly
Click Here to Enlarge |
Service Parts
Click Here to Enlarge |
If you are seeking information for the other parts shown in the picture, please Contact Us. We will be able to provide you with a more detailed parts list.
Firepot Assembly
#1 - Firepot Assembly
#2 - Pull Rod Assembly
#3 - Heating Element Assembly 18" (Loop Igniter)
#5 - Thermocouple Clamp
#6 - Thermocouple
Gasket, Firepot
Floor, Firepot
Face and Glass Assembly
#2 - Face Assembly
#6 - Glass Assembly
Tape, Door Corner - Field Cut to Size
Gasket, Tadpole, 3/8
Service Parts
#10 - Baffle Assembly
#19d - Snap Disc, Manual Reset
#19c - Snap Disc
#19b - Snap Disc
#19a - Snap Disc, 110-20
#20 - Blower, Convection
#22 - Blower, Exhaust Combustion
#22a - Gasket, Combustion Blower
#23 - Vacuum Switch
#24 - Control Board 3 Speed
#27 - Feed Assembly
Bearing, Feed System, Nylon
Feed Motor W/Cap
Feed Spring Assembly
Gasket, Feed Motor
Hose, Vacuum, 5/32 Id
Igniter Wire (5Ft) & (4) Ceramic Nuts
Switch, 3-Position
Capacitor, Rep Jumper
Gasket, Exhaust Combustion Blower
Ceramic Nuts, (Igniter)
Cleanout Tool
Power Cord
Magnet Round
Wire Harness / Junction Box
